Diange Milang

Changing Washer Taps

Home »  Water Tap »  Changing Washer Taps

Changing Washer Taps

On March 18, 2016, Posted by , In Water Tap, With No Comments

man fixing water tapAs time passes, kitchen or bathroom taps can start to leak. It is not a huge issue. It is primarily because of a wearing out washer. It is not acceptable to have water dripping in taps. Water can be wasted so much. This needs replacement imeddiately.

It is crucial to know the types of taps present at home. Various kinds of taps need different sorts of replacement and treatment. For example, a specific tap has washer which is different from average taps, non-rising and rising taps have the same types of washer. However, these differ in parts. The most complicated type of taps have a special kind of washer. Washers are different from each other like joint washers, washers for tap sets mixer, spare jumpers and more.

Changing tap washer at home

To start, you need to have the water supply cut. Then open the tap in order for water to flow out in the pipes.

When an older model of tap is present, turn this on completely and unfasten its cover. When a spanner is required, wrap the cover using cloth to prevent any damage. Old form of covers most of the time need some lubrication to open smoothly. Penetrating oil must be used on these covers. Make it secure through holding it using another spanner. A grub screw is usually used on this. Penetrating oil may be needed for the screw to be removed.

You can find a related post from http://www.huffingtonpost.com/news/bathroom-remodeling/. When shrouded head taps are present, the head should simply be removed and then you will see its nut. This can be done through pulling it out or this may be fixed with a type of screw which is hidden beneath a small cap on top.

Unscrew its nut and then remove the tap’s top mechanism. A washer can be seen at the base which is secured properly with a nut or not.

For rising type of spindle tap, you will require replacement of the entire jumper, in case you are not able to remove the nut. The same thing happens with non-rising type of spindle tap. You will need to replace the whole mechanism or just a part of this.

Grease or petroleum jelly can be used as a form of lubrication on the material. It can be great especially for future use, in case you need to disassemble the tap at any time. With the help of proper lubrication, removing the nut can be done easily and swiftly.

Treatment for mixer tap leakage

It is quite easy to treat leakage of mixer taps compared to other taps. Mixer taps can get leaks at the base of the nozzle. You simply have to remove the nozzle by pulling it and removing its grub screw. For every brand available, there is a specific waster positions which is linked to it. You will need to remove the washer and have it replaced with a new one. Joints must be applied with some form of lubrication so that this can be smooth. After which, you can now put the nozzle back.

Leave a Reply

Your email address will not be published. Required fields are marked *